MasterTop 1273 — Low emission (AgBB conformity), self-leveling, medium to heavy load bearing epoxy system with a smooth surface

Fields of application: for use on medium to heavy duty industrial flooring when a smooth and homogeneous surface is required: for example warehouse, production halls, etc.

Verbrauch ca.:


MasterTop P 604 (or P617) yellowish, EP,2 component, pre-filled

0,3–0,5 kg/m²

Sand broadcast*

Oven dried silica sand, size 0,3–0,8 mm, uniformly applied, not in excess
0,8–1,0 kg/m²

Scratch primer
MasterTop P 604 (or P 617)
Filled 1 : 0,5 up to 1:1 with oven dried silica sand, size 0,1–0,3 mm

0,6–2,0 kg/m²**
Sand broadcast*
oven dried silica sand, size 0,3–0,8
2,0–3,0 kg/m²

Body coat

MasterTop BC 372
pigmented, EP, 2 component, low emission

3,5–5,0 kg/m²**
Filled till 1:0,7 with oven dried silica sand, size 0,1–0,3 mm


Optional***/Top coat
Option 1

MasterTop TC 442W pigmented 
pigmented, PUR, 2 component, water-based, UV resistant, silk-mat

0,08–0,10 kg/m²

Optional/Top coat
Option 2
MasterTop TC 442W
Top coat clear, PUR, 2 omponent, water-based, UV resistant, silk-mat

0,10–0,15 kg/m²
Total thickness of the system ca. 2,5–5,0 mm
Remark: Consumptions are indicative and may be higher, depending on substrate roughness, temperature and porosity, as well as wasteroduced during application.
* MasterTop P 604 needs only to be broadcasted with silica sand if the re-coating intervals are not respected.
** Total consumption including sand. The consumption depends on the filling ratio and the roughness of the surface.
*** The use of a mat finish top coat or the broadcasting of aggregates (for ex MasterTop Texture fine) is required in order to reach a slip resistant surface.


MasterTop 1273: Technical Data Sheet (December 2015)

pdf (123.40 Kb)