MasterTop 1273 R — Medium to heavy load bearing epoxy system with slip resistant properties

Fields of application: for use on medium to heavy duty industrial flooring when slip resistant flooring is required: for example warehouse, production halls, etc.

consumption ca.:
 

Primer
MasterTop P 604 (or P617) yellowish, EP, 2 component, pre-filled
0,3–0,5 kg/m²
Optional/
Sand broadcast*
Oven dried silica sand, size 0,3–0,8 mm, uniformly applied, not in excess
0,8–1,0 kg/m²
Optional/
Scratch primer
MasterTop P 604 (or P 617)
Filled 1 : 0,5 up to 1:1 with oven  dried silica sand, size 0,1–0,3 mm

0,6–2,0 kg/m²**
Optional/
Sand broadcast*
oven dried silica sand, size 0,3–0,8
2,0–3,0 kg/m²


Body coat

MasterTop BC 372
pigmented, EP, 2 component, low emission

0.9–1,2 kg/m²**
Filled till 1:0,6 with oven dried silica sand, size 0,1–0,3 mm


Sand broadcast

Oven dried silica sand, size 0,3–0,8 mm, uniformly applied, in excess

2,0–4,0 kg/m²
 
Top coat

MasterTop BC 372
pigmented, EP, 2 component, low emission

0,6–1,0 kg/m²
Total thickness of the system ca. 2,5–3,0 mm
Remark: Consumptions are indicative and may be higher, depending on substrate roughness, temperature and porosity, as well as waste produced during application.
* MasterTop P 604 needs only to be broadcasted with silica sand if the re-coating intervals are not respected.
** Total consumption including sand. The consumption depends on the filling ratio and the roughness of the surface.

Downloads

MasterTop 1273 R: Technical Data Sheet (December 2015)

pdf (121.79 Kb)